View PDS36010_5034589.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

PDS360
3A SCHOTTKY BARRIER RECTIFIER PowerDI(R)5
Features
* * * * * * * * Guard Ring Die Construction for Transient Protection Low Power Loss, High Efficiency Low Reverse Leakage Current For Use in High Frequency Inverters, Free Wheeling, and Polarity Protection Applications High Forward Surge Current Capability Lead Free Finish, RoHS Compliant (Note 1) "Green" Molding Compound (No Br, Sb) Qualified to AEC-Q101 Standards for High Reliability
Mechanical Data
* * * * * * Case: PowerDI 5 Case Material: Molded Plastic, "Green" Molding Compound. UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020 Terminals: Finish - Matte Tin annealed over Copper leadframe. Solderable per MIL-STD-202, Method 208 Polarity: See Diagram Weight: 0.093 grams (approximate)
(R)
LEFT PIN RIGHT PIN
BOTTOMSIDE HEAT SINK
Top View
Bottom View
Note: Pins Left & Right must be electrically connected at the printed circuit board.
Ordering Information (Note 2)
Part Number PDS360-13
Notes:
Case (R) PowerDI 5
Packaging 5000/Tape & Reel
1. EU Directive 2002/95/EC (RoHS). All applicable RoHS exemptions applied, see EU Directive 2002/95/EC Annex Notes. 2. For packaging details, go to our website at http://www.diodes.com.
Marking Information
S360
YYWWK
S360 = Product type marking code = Manufacturers' code marking YYWW = Date code marking YY = Last two digits of year (ex: 05 for 2005) WW = Week code (01 - 53) K = Factory Designator
PowerDI is a registered trademark of Diodes Incorporated. PDS360
Document number: DS30479 Rev. 10 - 2
1 of 5 www.diodes.com
December 2010
(c) Diodes Incorporated
PDS360
Maximum Ratings @TA = 25C unless otherwise specified
Single phase, half wave, 60Hz, resistive or inductive load. For capacitance load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current (See also Figure 4) Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave superimposed on rated load Symbol VRRM VRWM VR VR(RMS) IO IFSM Value 60 42 3 100 Unit V V A A
Thermal Characteristics
Characteristic Thermal Resistance Junction to Soldering Point Thermal Resistance Junction to Ambient Air (Note 3) TA = 25C Thermal Resistance Junction to Ambient Air (Note 4) TA = 25C Thermal Resistance Junction to Ambient Air (Note 5) TA = 25C Operating and Storage Temperature Range Symbol RJS RJA RJA RJA TJ, TSTG Typ 95 70 50 -65 to +150 Max 3.0 Unit C/W C/W C/W C/W C
Electrical Characteristics @TA = 25C unless otherwise specified
Characteristic Reverse Breakdown Voltage (Note 6) Symbol V(BR)R Min 60 Typ 0.57 0.53 0.51 0.70 0.62 0.60 3 1.5 Max 0.62 0.60 0.57 0.76 0.70 0.66 150 10 15 Unit V Test Condition IR = 0.2mA IF = 3A, TJ = 25C IF = 3A, TJ = 100C IF = 3A, TJ = 125C IF = 6A, TJ = 25C IF = 6A, TJ = 100C IF = 6A, TJ = 125C TJ = 25C, VR = 60V TJ = 100C, VR = 60V TJ = 125C, VR = 60V
Forward Voltage
VF
V
Reverse Leakage Current (Note 6)
Notes:
IR
A mA mA
3. FR-4 PCB, 2 oz. Copper, minimum recommended pad layout per http://www.diodes.com. 4. Polymide PCB, 2 oz. Copper, minimum recommended pad layout per http://www.diodes.com. 5. Polymide PCB, 2 oz. Copper. Cathode pad dimensions 9.4 mm x 7.4 mm. Anode pad dimensions 2.7 mm x 1.6 mm. 6. Short duration pulse test used to minimize self-heating effect.
PowerDI is a registered trademark of Diodes Incorporated. PDS360
Document number: DS30479 Rev. 10 - 2
2 of 5 www.diodes.com
December 2010
(c) Diodes Incorporated
PDS360
IF, INSTANTANEOUS FORWARD CURRENT (A)
4
100 10 1 0.1 0.01 0.001 0.0001 0.00001 0 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics
1,000
PD, POWER DISSIPATION (W)
3
2
1
0
0
6 7 2 4 5 3 IF(AV), AVERAGE FORWARD CURRENT (A) Fig. 1 Forward Power Dissipation 1
IR, INSTANTANEOUS REVERSE CURRENT (A)
10m 1m
CT, TOTAL CAPACITANCE (pF)
100
100n 10n 1n 100 0 10 30 50 20 40 60 VR, INSTANTANEOUS REVERSE VOLTAGE (V) Fig. 3 Typical Reverse Characteristics
10 0 20 5 15 30 10 25 VR, DC REVERSE VOLTAGE (V) Fig. 4 Total Capacitance vs. Reverse Voltage
3.5 3 2.5 2 1.5 1 0.5 0 0 75 100 150 25 50 125 TA, AMBIENT TEMPERATURE (C) Fig. 5 Forward Current Derating Curve
TA, DERATED AMBIENT TEMPERATURE (C)
4 IF(AV), AVERAGE FORWARD CURRENT (A)
200
160
120
80
40
0 0
15 45 30 VR, DC REVERSE VOLTAGE (V) Fig. 6 Operating Temperature Derating
60
PowerDI is a registered trademark of Diodes Incorporated. PDS360
Document number: DS30479 Rev. 10 - 2
3 of 5 www.diodes.com
December 2010
(c) Diodes Incorporated
PDS360
Package Outline Dimensions
A D b2 A2 D2
L
E
E1
E2
W L1 e b1 b1 A2
PowerDI 5 Dim Min Max A 1.05 1.15 A2 0.33 0.43 b1 0.80 0.99 b2 1.70 1.88 D 3.90 4.05 D2 3.054 Typ E 6.40 6.60 e 1.84 Typ E1 5.30 5.45 E2 3.549 Typ L 0.75 0.95 L1 0.50 0.65 W 1.10 1.41 All Dimensions in mm
(R)
Suggested Pad Layout
X
Y
Dimensions C G X X1 Y Y1
X1 (2x) G
Value (in mm) 1.840 0.852 3.360 1.390 4.860 1.400
Y1 (2x) C
PowerDI is a registered trademark of Diodes Incorporated. PDS360
Document number: DS30479 Rev. 10 - 2
4 of 5 www.diodes.com
December 2010
(c) Diodes Incorporated
PDS360
IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright (c) 2010, Diodes Incorporated www.diodes.com
PowerDI is a registered trademark of Diodes Incorporated. PDS360
Document number: DS30479 Rev. 10 - 2
5 of 5 www.diodes.com
December 2010
(c) Diodes Incorporated

▲Up To Search▲

Price & Availability of PDS36010

	To Download PDS36010 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .